Sayasept- HP

Home / Medical & public / Large surfaces / Sayasept- HP

Disinfectant for medical, dental and health surfaces
Based on compounds of quaternary ammonium and polyhexamethylene biguanide
Officially licensed by the Food and Drug Administration
Free of aldehyde and phenol compounds
No corrosive effects on the surfaces used in consumer dilution
Simultaneous cleaning and disinfection power
The ability to clean without creating the effect of adhesion and flaking of the remaining materials on the surfaces (due to the presence of PHMB)
Has broad antimicrobial effects against bacteria, yeast and fungi according to EN13697, EN1040, EN13624 and EN13727
Continued activity in hard water and a wide range of pH changes
Stability of the diluted solution up to 14 days
No unpleasant smell

the amount of the compound in 100 grams of the product:

Quaternary ammonium compound 6-8 gr
(benzalkonium chloride+didecyl dimethyl ammonium chloride)
Polyhexamethylene biguanide hydrochloride 2-3 gr
Excipients up to 100

• First, prepare the diluted solution based on the dilution used.
• Be sure to always add a measured amount of the concentrate solution to the water, not the other way around.
• After preparing the diluted solution, disinfect the target surfaces using a clean cloth or tissue.
• Disinfection has been done after the specified contact time.
Avoid simultaneous use with anionic cleaners.
• If the diluted solution is visibly contaminated, replace it with a freshly prepared solution.

• Store in an environment with sufficient ventilation.
• Gloves and masks should be used for dilution.
• Avoid drinking and swallowing the product.
• Avoid touching or getting the product into the eyes and ears.
• Keep out of reach of children and uninformed people.
• Keep away from direct sunlight and at a temperature between 5 and 35 degrees Celsius.
• Do not use at the same time with anionic cleaners or combine with aldehyde products.
• Avoid discharging product waste into running water sources.

* The spectrum of antimicrobial effect is regularly updated by the scientific department of the company. Therefore, to learn about the latest approved product standards, please contact the company’s authorized representatives.