Sporcidine

Home / Medical & public / High level disinfectants / Sporcidine

Active solution of glutaraldehyde 2.4%
Officially licensed by the Food and Drug Administration
Certified by Olympus
Ready to use without activation
Reusability for 28 days (quick test evaluation)
Effective on a wide range of microorganisms, including bacteria, spore bacteria, yeast, fungi and mycobacterium according to EN13624, EN13727, EN14347 and EN14348
Disinfection effect against bacteria and mycobacterium in 10 minutes
Sporicidal effect in 60 minutes EN14347
High level disinfection in 20 minutes (due to having 2.4% glutaraldehyde)
According to clinical guidelines
No corrosive effects on the components of endoscopes

the amount of the compound in 100 grams of the product:

Glutaraldehyde 2.4 gr
Excipients up to 100

Manual method:
First, separate the components of the device and wash them with a suitable detergent (such as Hayside EZ_30 or Hayside EZ_32).
Then for high-level disinfection for 10 to 45 minutes (based on the device manufacturer’s recommendation for high-level disinfection solutions containing amounts greater than or equal to 2.4% of glutaraldehyde) in the solution
Immerse the sporicides. To destroy the spores, it needs to be immersed for 1 hour. This product can be reused for a maximum period of 28 days.
Automatic method:
The tank of the device should be filled with Sporecidin (10-12) liters. The device automatically injects the solution from the tank into the loading sink in each cycle and after the set time and complete immersion of the endoscope, it drains the solution and transfers it to the tank.

Avoid drinking and swallowing the product.
Avoid contact with eyes.
Do not leave the product lid open.
Keep out of reach of children and uninformed people.
In case of accidental ingestion, consult a doctor immediately.
Keep away from heat, flame, sources of sparks and direct sunlight.
Store at a temperature between 5 and 35 degrees Celsius.
It is better to use appropriate gloves and mask and pay attention to proper ventilation of the environment in order to prevent possible injuries while working with chemicals.

* The spectrum of antimicrobial effect is regularly updated by the scientific department of the company. Therefore, to learn about the latest approved product standards, please contact the company’s authorized representatives.